Findmall.com
 
 


This forum is currently read only. You can not log in or make any changes. This is a temporary situation.





Minelab SD, GP, & GPX Classroom Forum


Welcome! Log In Register
Anti interference coil VS Cancel mode
Posted by: BetaGod
Date: June 20, 2019 05:12PM
Hello guys I bought a 11 A.I coiltek coil for an area with huge Emi... i tested it in air and the difference on depth VS the cancel mode with the 11dd stock coil is around on 3 or 4 inches on a big target (vittorio emanuele II 10 cent copper 10grams and 3 centimeters of diameter) so i think is a lot less with a smaller target.. So the question is.. why spent around 250$ for a coil with the same performance of using the stock dd coil with cancel mode?

I'm not really happy with this.. I knew I would lose a bit of depth vs a standard 11" dd coil but i though it would have gone deeper then the cancel mode :(

Re: Anti interference coil VS Cancel mode
Posted by: Colour
Date: July 27, 2019 06:27PM
Haven't used an AI coil but have been to the WA salt flats. From what others have said, anything's better than cancel mode. Air tests mean nothing, absolutely nothing, they're not even an indicator of any kind. If I were you, I'd buy the very old, goldsearch 11" mono coil.